Archive for May, 2008
Cisco certification — 642-415 update
Cisco 642-414 is recently updated, and is succeeded by the new exam 642-415. Candidates can choose either 642-414 or 642-415. The expiry date of 642-414 is: 06/24/08 This article comes with some 642-181 Q&As from pass4sure. Please go to the official site pass4sure for the full version.For further information, please refer to pass4sure.com. The related page is: Download address Over the years, authentication, authorization, and accounting (AAA) has changed dramatically as users of new-world access technologies seek a way to authenticate, authorize, and start accounting records for b...
CiscoWorks VPN Monitor 1.2 Enterprises have recognized the dramatic benefits of virtual private networks (VPNs) using IP Security (IPSec) to reduce costs and secure their networks. Now,...
Introduction Cisco VPN Client System Requirements: Windows 98, ME, NT4, 2000, or Windows XP VPN Servers Supported: The Cisco VPN client i...
Dynamips, also known as “Cisco 7200 Simulator”, achieves simulation by simulating hardware, which is similar to VMware. It also supports NIC bridging mode, thus realize communication with Ethernet cards of the host. With OmniPeek you can s...
Lab Requirements: Lab Requirements: Download address: CCNA lab1 Change Router Name and Password Download address
For further information, please refer to pass4sure.com. The related page is:
Cisco certification — 642-181 update
http://www.pass4sure.com/642-181.html
...
Download:AAA Overview
Introduction
Download:CiscoWorks VPN Monitor for Windows
Download:http://www.ciscosim.net/thread-389-1-1.html
NetworkActiv Download and Install
NetworkActiv AUTAPF provides a very easy to use, quick to configure UDP and TCP Windows based port forwarder. AUTAPF is stand-alone and does not require any underlying components, for the port forwarding is done within the progra...
Cisco VPN Client - Download and Install
Client must run one of the following operating systems:
Linux
Solaris Unix
Mac OS X 10.2
TO Simulate WAN Environment with VMWARE and Dynamips
CCNA Lab2 Set Router Port Address/Label and Save Settings
1. On the router port, set the IP address to 202.119.249.219 and mask to 255.255.255.0.
2. Set the router prompt message to welcome to router CCNAlab.
3 Set the router port prompt message to this is a serial port
CCNA lab1 Change Router Name and Password
1. Router name: router
2. Set password to cisco, sercret to cisco, and vty to cisco.
3 All the passwords are required to be encrypted
CiscoWorks-VPN-Monitor-1.2-Windows
new Features
Note VPN Monitor release 1.2 and 1.2.1 have equivalent features and share installation and user guide documentation. All document references on Cisco.com to the 1.2 release also pertain to the 1.2.1 release.