Realexam---Let's gotolab! http://blog.realexam.net IT technology bible for self-study! Wed, 03 Dec 2008 01:37:12 +0000 http://wordpress.org/?v=2.6 en Cisco Introduces New CCIE Wireless Certification and CCIE Voice Lab Exam Enhancements http://blog.realexam.net/2008/12/02/cisco-introduces-new-ccie-wireless-certification-and-ccie-voice-lab-exam-enhancements/ http://blog.realexam.net/2008/12/02/cisco-introduces-new-ccie-wireless-certification-and-ccie-voice-lab-exam-enhancements/#comments Tue, 02 Dec 2008 15:28:00 +0000 admin http://blog.realexam.net/2008/12/03/cisco-introduces-new-ccie-wireless-certification-and-ccie-voice-lab-exam-enhancements/ cisco-voice.jpg

Introduces New , Lab Exam Enhancements

The demand for expert-level professionals proficient in the ability to design, install, deploy, and troubleshoot complex converged networks is growing exponentially. According to a commissioned study conducted by Forrester Consulting on behalf of .

  • 36 percent of the global companies surveyed reported that they have dedicated specialists in their IT organizations, a number that will almost double in the next five years.
  • 69 percent of the companies surveyed expect to have a dedicated specialist in their organizations within five years up from 40 percent currently.

In an effort to meet this demand, has made two significant additions to its program:

The assesses and validates expertise. Candidates who pass the exams demonstrate broad theoretical knowledge of networking and a solid understanding of local area networking (WLAN) technologies from , the market leader in WLAN technology.

Benefits of Certified

  • Greater opportunity for salary increase and job advancement in networking industry
  • Validates expertise in major aspects of WLAN technology
  • Provides next step for individuals interested in a career in managing or working with technologies

The written exam for will be made available through Pearson VUE on February 17th, 2009. The lab exam for will be made available in April 2009. To find out more about the and access the latest blueprints and study materials, visit the Cisco Learning Network.

Lab Exam Enhancements

In addition to the release of the new , has refreshed the lab exam for its popular . The refreshed Lab Exam v3.0 addresses critical skills that professionals must have, including the ability to define integrated services and mitigate future performance problems. Successful candidates demonstrate the skills to help companies increase productivity, and speed innovation.

To find out more about the exam for and access to the latest blueprints and study materials, visit the Cisco Learning Network.

Subscribe to receive emails and newsletters from .
Or modify your profile, subscriptions, and preferences if you’re already a customer.		 To no longer receive these messages from . Please allow 7-10 business days for changes to take effect. Read more about our privacy statement.
Please do not reply to this email for support. To view answers to commonly asked questions regarding the Program or to request assistance related to this email, visit the Online Support tool at www.cisco.com/go/certsupport.

Copyright (C) 2008, Systems, Inc. All rights reserved. , the logo, and Systems are registered trademarks of Systems, Inc. and/or its affiliates in the United States and certain other countries.
Systems, Inc. 170 West Tasman Drive, San Jose, California 95134 ATTN: Corporate Marketing (SJC08/3/4)

Related Posts

]]> http://blog.realexam.net/2008/12/02/cisco-introduces-new-ccie-wireless-certification-and-ccie-voice-lab-exam-enhancements/feed/ Cisco QOS Exam certification Guide second Edition http://blog.realexam.net/2008/09/20/cisco-qos-exam-certification-guide-second-edition/ http://blog.realexam.net/2008/09/20/cisco-qos-exam-certification-guide-second-edition/#comments Sat, 20 Sep 2008 13:55:36 +0000 admin http://blog.realexam.net/2008/09/20/cisco-qos-exam-certification-guide-second-edition/ cisco-qos.jpg

The Cisco IP Telephony focused certification tracks validate proficiency in designing, installing, and supporting a multiservice network solution. A solid understanding of quality-of-service (QoS) features and implementation is essential for all of the Cisco IP Telephony focused certifications and is also a core component of the CCIP certification.

Cisco QOS Exam Certification , Second Edition, is a best-of-breed Cisco exam study that focuses specifically on the objectives for the QOS 642-642 exam. Senior instructor and best-selling author Wendell Odom and senior AVVID consultant Michael Cavanaugh share preparation hints and test-taking tips, helping you identify areas of weakness and improve your QoS knowledge. Material is presented in a concise manner, focusing on increasing your understanding and retention of exam topics.

Cisco QOS Exam Certification , Second Edition, presents you with an organized test preparation routine through the use of proven series elements and techniques. “Do I Know This Already?” quizzes open each chapter and allow you to decide how much time you need to spend on each section. Exam topic lists and Foundation Summary tables, figures, and snapshot information make referencing easy and give you a quick refresher whenever you need it. Challenging chapter-ending review questions help you assess your knowledge and reinforce key concepts. The companion CD-ROM contains a powerful testing engine that allows you to focus on individual topic areas or take complete, timed exams. The assessment engine also tracks your performance and provides feedback on a module-by-module basis, presenting question-by-question remediation to the text. Well-regarded for its level of detail, assessment features, and challenging review questions and exercises, this book helps you master the concepts and techniques that will enable you to succeed on the exam the first time.

Cisco QOS Exam Certification , Second Edition, is part of a recommended learning path from Cisco Systems that includes simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. To find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit www.cisco.com/go/authorizedtraining.

This volume is part of the Exam Certification Series from Cisco Press. Books in this series provide officially developed exam preparation materials that offer assessment, review, and practice to help Cisco Career Certification candidates identify weaknesses, concentrate their study efforts, and enhance their confidence as exam day nears.

Editorial Reviews

Product Description

Official self-study test preparation for the Cisco QOS 642-642 exam. The official study helps you master all the topics on the QOS exam, including

  • QoS concepts, tools, and architectures
  • Modular QoS CLI (MQC), QoS Policy Manager (QPM), and AutoQoS
  • Classification and marking
  • Congestion management
  • Traffic shaping and policing
  • Congestion avoidance through drop policies
  • Compression tools and link fragmentation and interleaving (LFI) tools for link efficiency
  • LAN QoS
  • QoS best practices

The CCVP certification validates a robust set of skills in implementing, operating, configuring, and troubleshooting a converged IP network. A solid understanding of quality-of-service (QoS) features and implementation is essential for CCVP certification and is also a core component of the CCIP® certification.

Cisco QOS Exam Certification , Second Edition, is a best-of-breed Cisco® exam study that focuses specifically on the objectives for the QOS 642-642 exam. Senior instructor and best-selling author Wendell Odom and senior AVVID consultant Michael Cavanaugh share preparation hints and test-taking tips, helping you identify areas of weakness and improve your QoS knowledge. Material is presented in a concise manner, focusing on increasing your understanding and retention of exam topics.

Cisco QOS Exam Certification , Second Edition, presents you with an organized test preparation routine through the use of proven series elements and techniques. “Do I Know This Already?” quizzes open each chapter and allow you to decide how much time you need to spend on each section. Exam topic lists and Foundation Summary tables, figures, and snapshot information make referencing easy and give you a quick refresher whenever you need it. Challenging chapter-ending review questions help you assess your knowledge and reinforce key concepts. The companion CD-ROM contains a powerful testing engine that allows you to focus on individual topic areas or take complete, timed exams. The assessment engine also tracks your performance and provides feedback on a module-by-module basis, presenting question-by-question remediation to the text. Well-regarded for its level of detail, assessment features, and challenging review questions and exercises, this book helps you master the concepts and techniques that will enable you to succeed on the exam the first time.

Cisco QOS Exam Certification , Second Edition, is part of a recommended learning path from Cisco Systems® that includes simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. To find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit www.cisco.com/go/authorizedtraining.

Companion CD-ROM

The companion CD-ROM contains a test bank with more than 300 practice questions, flash card format questions, and an electronic version of the text.

CD-ROM test engine powered by www.boson.com. Boson Software is a Cisco Learning Partner.

This volume is part of the Exam Certification Series from Cisco Press®. Books in this series provide officially developed exam preparation materials that offer assessment, review, and practice to help Cisco Career Certification candidates identify weaknesses, concentrate their study efforts, and enhance their confidence as exam day nears.

Download link: Cisco QOS Exam certification Guide Second Edition

Del.icio.us : , , ,

Related Posts

]]> http://blog.realexam.net/2008/09/20/cisco-qos-exam-certification-guide-second-edition/feed/ Qemu – ASA SSL-VPN http://blog.realexam.net/2008/08/27/qemu-asa-ssl-vpn/ http://blog.realexam.net/2008/08/27/qemu-asa-ssl-vpn/#comments Wed, 27 Aug 2008 11:51:57 +0000 admin http://blog.realexam.net/2008/08/27/qemu-asa-ssl-vpn/ Requirement
1.Dynamips,Dynagen,Wincap,SecureCRT,Qemu etc.
2.IOS image for Dynamips:
(such as unzip-c3725-ix-mz.123-3c.bin, c3640-js-mz.124-10.bin)
3.BES (Option)
4.Mozilla Firefox (Option)
5.sslclient-win-1.1.3.173.pkg

sslclient-win-1.1.3.173.rar (370.45 KB)

6.openvpn-2.1_rc7-install.exe for TAP interface 

openvpn-2.1_rc7-install.rar (1.28 MB)

7.TFTP software  TFTP.rar (1.55 MB)

8.WindowsXP professional system (IE6 or higher!!!)
Topology

1.3640 Switch is not shown in the topology

2.’s eth0/0 is divided to 2 sub-interfaces,each belongs to one vlan
3.3640 switch connect to use a trunk point
4.’s eth0/0.10 belongs to VLAN10,eth0/0.20 belongs to VLAN20
5.HOST belongs to VLAN 10 outside, R1 belongs to VLAN20 inside

Object
Host can use SSL- connect to inside ,telnet the inside Route R1.
Configuration
Dynamips.net
[[router SW1]]
image = E:\Dynamips\Dynamips\images\unzip-c3640-js-mz.124-10.bin
model = 3640
console = 3015
ram = 256
confreg = 0×2142
idlepc =0×6041f880
exec_area = 64
mmap = false
slot0 = NM-16ESW
!—————————-connect to Route R1———————–
f0/1 = R1 f0/0
!—————————-connect to Dynamips SW1, use TAP 0,—————–
f0/10 = NIO_gen_eth:\Device\NPF_{8009E20D-E44F-4120-A419-F66848D50F1D}
!—————————-connect to HOST’s ——————————-
f0/15 = NIO_gen_eth:\Device\NPF_{DDF724B9-3D73-4020-BC7E-E8CE0FA8FFDF}
[[router R1]]
image = E:\Dynamips\Dynamips\images\unzip-c3725-ix-mz.123-3c.bin
model = 3725
console = 3011
ram = 64
confreg = 0×2142

.bat
!————————-connect to TAP 0 ,bridge with SW1’s f0/10—————————
………….
set nic1=-net nic,vlan=0,model=i82557b,macaddr=00:aa:00:00:02:01 -net tap,vlan=0,ifname=tap0 (Only one line,can’t input ‘Enter’)
Basic configuration

interface Ethernet0/0
no nameif
no security-level
no address
!
!—————————-connect to SW1 f0/10,belongs to VLAN10————————
interface Ethernet0/0.10
vlan 10
nameif outside
security-level 0
address 155.1.10.1 255.255.255.0
!
!—————————-connect to SW1 f0/10,belongs to VLAN20——————
interface Ethernet0/0.20
vlan 20
nameif inside
security-level 100
address 155.1.20.1 255.255.255.0
!

SW1
!———————————-created 2 vlans———————————–
SW1#vlan database
SW1(vlan)#vlan 10
SW1(vlan)#vlan 20
SW1(vlan)#exit
APPLY completed.
!———————————-connect with R1 f0/0—————————–
interface FastEthernet0/1
switchport access vlan 20
!
!———————————-connect with tap0———————————
interface FastEthernet0/10
switchport mode trunk
switchport trunk encap dot1q
!———————————-connect with HOST’s local area ———–
!
interface FastEthernet0/15
switchport access vlan 10

R1
!———————————–connect with SW1 f0/1—————————
interface FastEthernet0/0
address 155.1.20.2 255.255.255.0
!———————————–for Telnet——————————————-
line vty 0 4
login
password

Upload SSL- client software to FLASH
# copy tftp flash
Address or name of remote host []? 155.1.10.2
Source filename []? sslclient-win-1.1.3.173.pkg
Destination filename [sslclient-win-1.1.3.173.pkg]?
Accessing tftp://155.1.10.2/sslclient-win-1.1.3.173.pkg…!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Writing file disk0:/sslclient-win-1.1.3.173.pkg…
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
416354 bytes copied in 8.700 secs (52044 bytes/sec)
# dir flash:
Directory of disk0:/
—————————————————————————————
56 -rwx  416354 05:22:39 Jul 09 2008 sslclient-win-1.1.3.173.pkg
—————————————————————————————
15679488 bytes total (8200192 bytes free)

Delete some unused folders
# del /recursive flash:/csco_config
Delete filename [csco_config]?
Examine files in directory disk0:/csco_config? [confirm]
………..

Enable webvpn on outside,use port 444
(config)# webvpn
!—————–Don’t conflict with ASDM’s Manage port 443 ,IMPORTANT!!!————–
(config-webvpn)# port 444
(config-webvpn)# enable outside
INFO: WebVPN and DTLS are enabled on ‘outside’.

Basic SSL- configuration
!——————-create a address pool for ssl- dialer user—————————
local pool SSL-POOL 10.10.10.1-10.10.10.100
no failover
!——————-map ASDM image—————————————————
asdm image disk0:/asdm-602.bin
http server enable
!——————-enable webvpn use port 444——————————
webvpn
port 444
enable outside
!——————-map ssl-client software ———————————–
svc image disk0:/sslclient-win-1.1.3.173.pkg 1
svc enable
tunnel-group-list enable
!——————-create group-policy for login users———————–
group-policy mysslvpn-group-policy internal
group-policy mysslvpn-group-policy attributes
-tunnel-protocol svc webvpn
webvpn
svc ask enable
!————————–create a user named password for login——-
username password
!————————–map a group policy to the user ————————
username attributes
-group-policy mysslvpn-group-policy
!————————–create a tunnel group—————————————–
tunnel-group mysslvpn-group type remote-access
tunnel-group mysslvpn-group general-attributes
!—————————assign a address pool for the tunnel group—————–
address-pool SSL-POOL
tunnel-group mysslvpn-group webvpn-attributes
group-alias group- enable

Test
Open https://155.1.10.1:444 ,u can see the follow output:
Input username password , login!
 

What to next….
Next is all the Graphic User Interface , so ,I trust u can take it…..
 

Click Start AnyConnect …..

Related Posts

]]> http://blog.realexam.net/2008/08/27/qemu-asa-ssl-vpn/feed/ CISCO: ccnp 642-825 lab Q http://blog.realexam.net/2008/08/25/cisco-642-825-remote-new-lab-2-2/ http://blog.realexam.net/2008/08/25/cisco-642-825-remote-new-lab-2-2/#comments Tue, 26 Aug 2008 04:40:28 +0000 admin http://blog.realexam.net/2008/08/25/cisco-642-825-remote-new-lab-2-2/ Acme is a small export comany that has an existing enterprise that is made up exclusively of routers that are using EIGRP as the IGP. Their is up and operating properly. As part of their expansion, Acme has decided to connect to the internet via a broadband cable ISP. Your task is to enable this connection using the information below.

Connection Encapsulation: PPP

Connection Type: PPPoE client

Connection Authentication: None

Connection MTU: 1492 bytes

Address: Dynamically assigned by the ISP

Outbound Interface: E0/0

You will know that the connection has been successfully enabled when you can ping the simulated Internet address of 172.16.1.1

Note: Routing to the ISP: Manually configured default route

CPE# show route

….

Gateway of last resort is not set

192.168.1.0/27 is subnetted, 7 subnets

C 192.168.1.0 is directly connected, Ethernet0/1

D 192.168.1.32 [90/307200] via 192.168.1.2, 00:02:16,Ethernet0/1

D 192.168.1.64 [90/307200] via 192.168.1.2, 00:02:17,Ethernet0/1

D 192.168.1.96 [90/307200] via 192.168.1.2, 00:02:17,Ethernet0/1

D 192.168.1.128 [90/307200] via 192.168.1.3, 00:02:17,Ethernet0/1

D 192.168.1.192 [90/307200] via 192.168.1.3, 00:02:17,Ethernet0/1

D 192.168.1.224 [90/307200] via 192.168.1.3, 00:02:17,Ethernet0/1

CPE# show run

….

no service password-encryption

!

hostname CPE

!

boot-start-marker

boot-end-marker

!

no aaa new-model

resource policy

clock timezone PST 0

subnet-zero

no dhcp use vrf connected

!

interface Ethernet0/0

description link to cable modem

no address

shutdown

!

interface Ethernet0/1

description link to corporate nework

address 192.168.1.1 255.255.255.224

!

interface Ethernet0/2

no address

!

interface Ethernet0/3

no address

shutdown

!

router eigrp 1

192.168.1.0

auto-summary

!

line con 0

line vty 0 15

end

**********************************************************************

Configuration sequence:

cpe(config)#int e0/0

cpe(config-if)#pppoe enable                            ——enable pppoe

cpe(config-if)#pppoe-client dial-pool-number 1     —- Add into dialup pool 1

cpe(config-if)#no sh

cpe(config-if)#exit

cpe(config)#vpdn enable                          ——-Enable vpdn (dialup must be enabled)

cpe(config)#vpdn-group 1                 ———-Configure vpdn-group 1

cpe(config-vpdn)#request-dialin          ——–Configure the client as request-dialup

cpe(config-vpdn-req-in)#protocol pppoe                  ———–Configure protocols

cpe(config-vpdn-req-in)#exit

cpe(config-vpdn)#exit

cpe(config)#dialer-list 1 protocol permit        ——Configure interesting data traffic , trigger dialup

cpe(config)#int dialer 1        ——Configure dialup configuration 1

cpe(config-if)#encapsulation ppp          ———Encapsulate protocols

cpe(config-if)# address negotiated        ——-Configure address as autonegotiation, i.e. Automatic Acquisition

cpe(config-if)#dialer pool 1          ——- Add into the dialer pool 1

cpe(config-if)#dialer-group 1         ——–Quote interesting data traffic, trigger dialup. [This 1 must agree with the 1 following dialer-list ]

cpe(config-if)# mtu 1492            ————-Configure MTU

cpe(config-if)#exit

The lab uses fa0/0 to replace E0/0

Sh run :  

Current configuration : 1254 bytes

!

version 12.3

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname cpe

!

boot-start-marker

boot-end-marker

!

!

no aaa new-model

subnet-zero

!

!

!

cef

vpdn enable

!

vpdn-group 1

request-dialin

protocol pppoe

!

!

interface FastEthernet0/0

no address

duplex half

pppoe enable

pppoe-client dial-pool-number 1

!

interface Serial1/0

no address

shutdown

serial restart-delay 0

!

interface Serial1/1

no address

shutdown

serial restart-delay 0

!

interface Serial1/2

no address

shutdown

serial restart-delay 0

!

interface Serial1/3

no address

shutdown

serial restart-delay 0

!

interface Serial2/0

no address

shutdown

serial restart-delay 0

!

interface Serial2/1

no address

shutdown

serial restart-delay 0

!

interface Serial2/2

no address

shutdown

serial restart-delay 0

!

interface Serial2/3

no address

shutdown

serial restart-delay 0

!

interface Dialer1

address negotiated

mtu 1492

encapsulation ppp

dialer pool 1

dialer-group 1

!

classless

no http server

!

!

dialer-list 1 protocol permit

!

!

!!

!

!

gatekeeper

shutdown

!

!

line con 0

stopbits 1

line aux 0

line vty 0 4

!

!

end

Related Posts

]]> http://blog.realexam.net/2008/08/25/cisco-642-825-remote-new-lab-2-2/feed/ CISCO: ccnp 642-825 lab Q http://blog.realexam.net/2008/08/25/cisco-642-825-remote-new-lab-2/ http://blog.realexam.net/2008/08/25/cisco-642-825-remote-new-lab-2/#comments Tue, 26 Aug 2008 04:37:27 +0000 admin http://blog.realexam.net/2008/08/25/cisco-642-825-remote-new-lab-2/ Acme is a small export comany that has an existing enterprise that is made up exclusively of routers that are using EIGRP as the IGP. Their is up and operating properly. As part of their expansion, Acme has decided to connect to the internet via a broadband cable ISP. Your task is to enable this connection using the information below.

Connection Encapsulation: PPP

Connection Type: PPPoE client

Connection Authentication: None

Connection MTU: 1492 bytes

Address: Dynamically assigned by the ISP

Outbound Interface: E0/0

You will know that the connection has been successfully enabled when you can ping the simulated Internet address of 172.16.1.1

Note: Routing to the ISP: Manually configured default route

CPE# show route

….

Gateway of last resort is not set

192.168.1.0/27 is subnetted, 7 subnets

C 192.168.1.0 is directly connected, Ethernet0/1

D 192.168.1.32 [90/307200] via 192.168.1.2, 00:02:16,Ethernet0/1

D 192.168.1.64 [90/307200] via 192.168.1.2, 00:02:17,Ethernet0/1

D 192.168.1.96 [90/307200] via 192.168.1.2, 00:02:17,Ethernet0/1

D 192.168.1.128 [90/307200] via 192.168.1.3, 00:02:17,Ethernet0/1

D 192.168.1.192 [90/307200] via 192.168.1.3, 00:02:17,Ethernet0/1

D 192.168.1.224 [90/307200] via 192.168.1.3, 00:02:17,Ethernet0/1

CPE# show run

….

no service password-encryption

!

hostname CPE

!

boot-start-marker

boot-end-marker

!

no aaa new-model

resource policy

clock timezone PST 0

subnet-zero

no dhcp use vrf connected

!

interface Ethernet0/0

description link to cable modem

no address

shutdown

!

interface Ethernet0/1

description link to corporate nework

address 192.168.1.1 255.255.255.224

!

interface Ethernet0/2

no address

!

interface Ethernet0/3

no address

shutdown

!

router eigrp 1

192.168.1.0

auto-summary

!

line con 0

line vty 0 15

end

**********************************************************************

Configuration sequence:

cpe(config)#int e0/0

cpe(config-if)#pppoe enable                            ——enable pppoe

cpe(config-if)#pppoe-client dial-pool-number 1     —- Add into dialup pool 1

cpe(config-if)#no sh

cpe(config-if)#exit

cpe(config)#vpdn enable                          ——-Enable vpdn (dialup must be enabled)

cpe(config)#vpdn-group 1                 ———-Configure vpdn-group 1

cpe(config-vpdn)#request-dialin          ——–Configure the client as request-dialup

cpe(config-vpdn-req-in)#protocol pppoe                  ———–Configure protocols

cpe(config-vpdn-req-in)#exit

cpe(config-vpdn)#exit

cpe(config)#dialer-list 1 protocol permit        ——Configure interesting data traffic , trigger dialup

cpe(config)#int dialer 1        ——Configure dialup configuration 1

cpe(config-if)#encapsulation ppp          ———Encapsulate protocols

cpe(config-if)# address negotiated        ——-Configure address as autonegotiation, i.e. Automatic Acquisition

cpe(config-if)#dialer pool 1          ——- Add into the dialer pool 1

cpe(config-if)#dialer-group 1         ——–Quote interesting data traffic, trigger dialup. [This 1 must agree with the 1 following dialer-list ]

cpe(config-if)# mtu 1492            ————-Configure MTU

cpe(config-if)#exit

The lab uses fa0/0 to replace E0/0

Sh run :  

Current configuration : 1254 bytes

!

version 12.3

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname cpe

!

boot-start-marker

boot-end-marker

!

!

no aaa new-model

subnet-zero

!

!

!

cef

vpdn enable

!

vpdn-group 1

request-dialin

protocol pppoe

!

!

interface FastEthernet0/0

no address

duplex half

pppoe enable

pppoe-client dial-pool-number 1

!

interface Serial1/0

no address

shutdown

serial restart-delay 0

!

interface Serial1/1

no address

shutdown

serial restart-delay 0

!

interface Serial1/2

no address

shutdown

serial restart-delay 0

!

interface Serial1/3

no address

shutdown

serial restart-delay 0

!

interface Serial2/0

no address

shutdown

serial restart-delay 0

!

interface Serial2/1

no address

shutdown

serial restart-delay 0

!

interface Serial2/2

no address

shutdown

serial restart-delay 0

!

interface Serial2/3

no address

shutdown

serial restart-delay 0

!

interface Dialer1

address negotiated

mtu 1492

encapsulation ppp

dialer pool 1

dialer-group 1

!

classless

no http server

!

!

dialer-list 1 protocol permit

!

!

!!

!

!

gatekeeper

shutdown

!

!

line con 0

stopbits 1

line aux 0

line vty 0 4

!

!

end

Related Posts

]]> http://blog.realexam.net/2008/08/25/cisco-642-825-remote-new-lab-2/feed/ CISCO: ccnp 642-825 lab Q http://blog.realexam.net/2008/08/25/cisco-642-825-remote-new-lab/ http://blog.realexam.net/2008/08/25/cisco-642-825-remote-new-lab/#comments Tue, 26 Aug 2008 01:41:47 +0000 admin http://blog.realexam.net/2008/08/25/cisco-642-825-remote-new-lab/ Acme is a small export comany that has an existing enterprise that is made up exclusively of routers that are using EIGRP as the IGP. Their is up and operating properly. As part of their expansion, Acme has decided to connect to the internet via a broadband cable ISP. Your task is to enable this connection using the information below.

Connection Encapsulation: PPP

Connection Type: PPPoE client

Connection Authentication: None

Connection MTU: 1492 bytes

Address: Dynamically assigned by the ISP

Outbound Interface: E0/0

You will know that the connection has been successfully enabled when you can ping the simulated Internet address of 172.16.1.1

Note: Routing to the ISP: Manually configured default route

CPE# show route

….

Gateway of last resort is not set

192.168.1.0/27 is subnetted, 7 subnets

C 192.168.1.0 is directly connected, Ethernet0/1

D 192.168.1.32 [90/307200] via 192.168.1.2, 00:02:16,Ethernet0/1

D 192.168.1.64 [90/307200] via 192.168.1.2, 00:02:17,Ethernet0/1

D 192.168.1.96 [90/307200] via 192.168.1.2, 00:02:17,Ethernet0/1

D 192.168.1.128 [90/307200] via 192.168.1.3, 00:02:17,Ethernet0/1

D 192.168.1.192 [90/307200] via 192.168.1.3, 00:02:17,Ethernet0/1

D 192.168.1.224 [90/307200] via 192.168.1.3, 00:02:17,Ethernet0/1

CPE# show run

….

no service password-encryption

!

hostname CPE

!

boot-start-marker

boot-end-marker

!

no aaa new-model

resource policy

clock timezone PST 0

subnet-zero

no dhcp use vrf connected

!

interface Ethernet0/0

description link to cable modem

no address

shutdown

!

interface Ethernet0/1

description link to corporate nework

address 192.168.1.1 255.255.255.224

!

interface Ethernet0/2

no address

!

interface Ethernet0/3

no address

shutdown

!

router eigrp 1

192.168.1.0

auto-summary

!

line con 0

line vty 0 15

end

下面的答案由大笨牛提供:

配置顺序：

cpe(config)#int e0/0

cpe(config-if)#pppoe enable ——打开pppoe

cpe(config-if)#pppoe-client dial-pool-number 1 加入拨号池1

cpe(config-if)#no sh

cpe(config-if)#exit

cpe(config)#vpdn enable 打开vpdn（拨号必须打开）

cpe(config)#vpdn-group 1 配置vpnd组1

cpe(config-vpdn)#request-dialin 配置客户端为请求拨号

cpe(config-vpdn-req-in)#protocol pppoe 配置协议

cpe(config-vpdn-req-in)#exit

cpe(config-vpdn)#exit

cpe(config)#dialer-list 1 protocol permit 配置感兴趣数据流，触发拨号

cpe(config)#int dialer 1 配置拨号配置1

cpe(config-if)#encapsulation ppp 封装协议

cpe(config-if)# address negotiated 配置地址为协商，也就是自动获取。

cpe(config-if)#dialer pool 1 加入到拨号池1

cpe(config-if)#dialer-group 1 引用感兴趣数据流，触发拨号，【这里1和dialer-list 后面的1必须一致】

cpe(config-if)# mtu 1492 配置MTU

cpe(config-if)#exit

结果图：

Sh run：【实验使用fa0/0替代E0/0】

Current configuration : 1254 bytes

!

version 12.3

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname cpe

!

boot-start-marker

boot-end-marker

!

!

no aaa new-model

subnet-zero

!

!

!

cef

vpdn enable

!

vpdn-group 1

request-dialin

protocol pppoe

!

!

interface FastEthernet0/0

no address

duplex half

pppoe enable

pppoe-client dial-pool-number 1

!

interface Serial1/0

no address

shutdown

serial restart-delay 0

!

interface Serial1/1

no address

shutdown

serial restart-delay 0

!

interface Serial1/2

no address

shutdown

serial restart-delay 0

!

interface Serial1/3

no address

shutdown

serial restart-delay 0

!

interface Serial2/0

no address

shutdown

serial restart-delay 0

!

interface Serial2/1

no address

shutdown

serial restart-delay 0

!

interface Serial2/2

no address

shutdown

serial restart-delay 0

!

interface Serial2/3

no address

shutdown

serial restart-delay 0

!

interface Dialer1

address negotiated

mtu 1492

encapsulation ppp

dialer pool 1

dialer-group 1

!

classless

no http server

!

!

dialer-list 1 protocol permit

!

!

!!

!

!

gatekeeper

shutdown

!

!

line con 0

stopbits 1

line aux 0

line vty 0 4

!

!

end

Related Posts

]]> http://blog.realexam.net/2008/08/25/cisco-642-825-remote-new-lab/feed/ Cisco:testking 640-802 v9 pdf free download http://blog.realexam.net/2008/08/13/ciscotestking-640-802-v9-pdf-free-download/ http://blog.realexam.net/2008/08/13/ciscotestking-640-802-v9-pdf-free-download/#comments Thu, 14 Aug 2008 01:44:09 +0000 admin http://blog.realexam.net/2008/08/13/ciscotestking-640-802-v9-pdf-free-download/  

Exam 640-802: CertifieNetwork Associate Exam ()

Number of questions: 50-60

Duration: 1 hour

Exam Topics Include:

1.  Describe how a works

2. Configure, verify and troubleshoot a switch with VLANs and interswitch communications

3.  Implement an addressing scheme and Services to meet requirements in a medium-size Enterprise branch office .

4.  Configure, verify, and troubleshoot basic router operation and routing.

5. Explain and select the appropriate administrative tasks required for a WLAN

6. Identify security threats to a and describe methods to mitigate those threats

7.  Implement, verify, and troubleshoot Address Translation (NAT) and Access Control Lists (ACLs).

8.  Implement and verify WAN links, including frame relay and PPP

The ( Certified Associates) is an introductory level exam for those relatively new to networking. The exam by systems was designed for the candidates who can install, configure and administer small to medium sized LANs and WANs.  The is a prerequisite for the some higher level certifications like the . The exam is valid for three years.  Job roles for the individuals who are certified include administrators, system managers, and consultants.

The TestKing 640-802 exam products are designed to maximize your learning productivity and focus only on the important aspects that will help you to pass your exam.  We will provide you with exam questions and verified answers, with detailed explanations, that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. Our exam guides are not just questions and answers. Our questions have detailed explanations for every answer, ensuring that you fully understand the questions and the concept behind the questions.

Furthermore, we are constantly updating our study materials. These exam updates are supplied free of charge to TestKing customers.  Our clients receive the most reliable and up-to-date information when they decide to take the exam, just contact us. Our candidates walk into the Testing Room with the knowledge and confidence they need to pass their exam.

You can take advantage of the TestKing 640-802 Value Pack and save time and money while developing your skills to pass your exam.  This value pack will provide all the training materials you need to build your learning foundation and ensure your success on the exam, for one low price.

Download link: blog_realexam_net-testking-640-802 v9.rar

Password:        blog.realexam.net

Related Posts

]]> http://blog.realexam.net/2008/08/13/ciscotestking-640-802-v9-pdf-free-download/feed/ Cisco:642-901 testking v12 free download http://blog.realexam.net/2008/08/12/cisco642-901-testking-v12-free-download/ http://blog.realexam.net/2008/08/12/cisco642-901-testking-v12-free-download/#comments Tue, 12 Aug 2008 12:50:57 +0000 admin http://blog.realexam.net/2008/08/12/cisco642-901-testking-v12-free-download/ Exam 642-901: Building Scalable Internetworks (BSCI)

Exam Topics Include:
1.  Implement EIGRP operations.
2.  Implement multiarea OSPF operations.
3.  Describe integrated IS-IS.
4.  Implement IOS routing features.
5.  Implement BGP for enterprise ISP connectivity
6.  Implement multicast forwarding.
7.  Implement IPv6.

The Building Scalable Internetworks (BSCI) exam is a qualifying exam for the , CCDP, and certifications. The BSCI 642-901 exam will certify that the successful candidate has important knowledge and skills necessary to use advanced addressing and routing in implementing scalability for routers connected to LANs and WANs.

The TestKing 642-901 exam products are designed to maximize your learning productivity and focus only on the important aspects that will help you to pass your exam, the first time.  We will provide you with exam questions and verified answers, with detailed explanations, that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. Our exam guides are not just questions and answers. Our questions have detailed explanations provided by our certified industry experts, ensuring that you fully understand the questions and the concept behind the questions. 

These TestKing experts continuously update our study materials with new questions and explanations, as they become available. These exam updates are supplied free of charge to our TestKing customers.  Our customers receive the most reliable and up-to-date information available anywhere on the market, so they can be sure that they will be ready for their exam on their testing day. Our candidates walk into the Testing Room with the knowledge and confidence they need to pass their exam on their very first attempt.

You can take advantage of the TestKing 642-901 Value Pack and save time and money while developing your skills to pass your exam.  This value pack bundles in all of the training materials you will need to build your learning foundation and ensure your success on the exam, for one low price.  This bundle price is less than the exam itself.  Stop wasting time and money re-taking exams.  Purchase the 642-901 TestKing products today and pass the very first time!

download link:Blog.realexam.net—testking 642-901 v12 free download

password: blog.realexam.net

Related Posts

]]> http://blog.realexam.net/2008/08/12/cisco642-901-testking-v12-free-download/feed/ Fax, Modem, and Text for IP Telephony http://blog.realexam.net/2008/08/10/fax-modem-and-text-for-ip-telephony/ http://blog.realexam.net/2008/08/10/fax-modem-and-text-for-ip-telephony/#comments Mon, 11 Aug 2008 06:26:32 +0000 admin http://blog.realexam.net/2008/08/10/fax-modem-and-text-for-ip-telephony/ Telephony has revolutionized many aspects of telecommunications and it continues to be deployed at a rapid pace. The benefits of transporting over an infrastructure include increased flexibility, better scalability, and a significant cost savings over traditional telephony networks. However, during the deployment of these solutions, other types of traditional telephony communications that can also realize these same benefits are often overlooked or ignored.

Fax, Modem, and Text for Telephony is a comprehensive resource that confronts the need for information on transporting alternative, non- communications over the protocol. Beginning with the basic theory and operation of fax, modem, and text telephony, this book then educates you on all of the current transport options that are available. An extensive design then provides the pertinent advice and best practices for making the correct planning decisions and choosing the best transport option for your .

Fax, Modem, and Text for Telephony also includes meticulous configuration and troubleshooting guides. The configuration guides in this book include a number of sample configurations and tips to manage any fax, modem, or text deployment. The troubleshooting guides present the essential methodologies, debugs, and analysis tools for quickly resolving both the common and complex issues that may be encountered. This book is the perfect companion to other resources, and it is the only book that empowers you to successfully handle any fax, modem, or text implementation.

Download Fax, Modem, and Text for IP Telephony

Related Posts

]]> http://blog.realexam.net/2008/08/10/fax-modem-and-text-for-ip-telephony/feed/ CCIP BGP 3.2 Presentation Files http://blog.realexam.net/2008/08/10/ccip-bgp-32-presentation-files/ http://blog.realexam.net/2008/08/10/ccip-bgp-32-presentation-files/#comments Mon, 11 Aug 2008 06:25:11 +0000 admin http://blog.realexam.net/2008/08/10/ccip-bgp-32-presentation-files/

The 642-661 BGP exam is a qualifying exam for the Certified Internetwork Professional . The 642-661 BGP exam tests material covered under the Configuring BGP on Routers (BGP) v 3.1 course. The BGP exam assesses a candidate’s understanding of the theory of BGP, ability to configure BGP on IOS routers, and skills with troubleshooting on BGP. As a routing protocol, BGP is one of the underlying foundations of the Internet and new-world technologies.

Download CCIP BGP 3.2 Presentation Files

Related Posts

]]> http://blog.realexam.net/2008/08/10/ccip-bgp-32-presentation-files/feed/ CCNP Quick Reference http://blog.realexam.net/2008/08/10/ccnp-quick-reference-2/ http://blog.realexam.net/2008/08/10/ccnp-quick-reference-2/#comments Mon, 11 Aug 2008 06:23:46 +0000 admin http://blog.realexam.net/2008/08/10/ccnp-quick-reference-2/ As a final exam preparation tool, the Quick Reference provides a concise review of all objectives on the four exams, including BSCI (642-901), BCMSN (642-812), ISCW (642-825) and ONT (642-845). This book provides you with detailed, graphical-based information, highlighting only the key topics in cram-style format. The easy-to-reference format and succinct presentation help you drill on key exam topics.

With this document as your , you will review topics on routing, switching, secure remote access networks, security, and quality of service (). This fact-filled Quick Reference allows you to get all-important information at a glance, helping you to focus your study on areas of weakness and to enhance memory retention of essential exam concepts.

Download CCNP Quick Reference

Related Posts

]]> http://blog.realexam.net/2008/08/10/ccnp-quick-reference-2/feed/ Troubleshooting Cisco IP Telephony http://blog.realexam.net/2008/08/10/troubleshooting-cisco-ip-telephony/ http://blog.realexam.net/2008/08/10/troubleshooting-cisco-ip-telephony/#comments Mon, 11 Aug 2008 06:22:13 +0000 admin http://blog.realexam.net/2008/08/10/troubleshooting-cisco-ip-telephony/ Reveals the methodology you need to resolve complex problems in an telephony

* Master troubleshooting techniques and methodologies for all parts of a Telephony solution- CallManager, phones, gateways, applications, and more
* Learn how to investigate and resolve quality problems, including delayed audio, choppy or garbled audio, static and noise, one-way or no-way audio, and echo
* Read about the variety of trouble-shooting tools at your disposal and how and when to use them based on the problem type
* Discover the potential causes of common problems and how to efficiently troubleshoot them to resolution
* Learn how to identify and resolve gateway problems by breaking the components into logical groups and following a methodical troubleshooting approach
* Use best practices recommendations to build a stronger telephony deployment and avoid common mistakes

telephony represents the future of telecommunications: a converged data and infrastructure boasting greater flexibility and more cost-effective scalability than traditional telephony. The ability to troubleshoot an telephony environment and the underlying infrastructure is vitally important, just as it is in any complex system.

Download Troubleshooting Cisco IP Telephony

Related Posts

]